ADAPTEC, INC. AHA1530P Card Type Hard drive controller card Hard Drives supported Up to 7/15 SCSI devices Floppy drives supported None Data Bus 16-bit ISA Card Size Half-length, full-height card [Image] CONNECTIONS Function Location Function Location 4-pin connector - J2 50-pin SCSI connector J4 drive active LED - external 50-pin SCSI connector J3 - internal USER CONFIGURABLE SETTINGS Function Label Position » Port address is 340h-35Fh SW4 Off Port address is 140h-15Fh SW4 On » Factory configured - do not alter SW5 Unidentified » F Factory configured - do not SW5 Unidentified alter BIOS ADDRESS SELECTION Address SW1/C SW1/D SW1/E C8000h On Off On CC000h On Off Off D0000h Off On On D4000h Off On Off D8000h Off Off On DC000h Off Off Off DC000h, inactive On On Off BIOS disable On On On DIAGNOSTIC LED(S) LED Color Status Condition DS1 Green On Termination is set correctly DS1 Red On More than two devices are terminated DS1 Orange On Fewer than two devices are terminated Note: The LED only light up when the disk drive is active.